Our readers keep the lights on and my garage snacks stocked. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A dead battery or loose mount turns your phone from a riding essential into a hazard at highway speed. You need a motorcycle phone mount with wireless charger that actually grips your phone, keeps it charged through a full day of riding, and survives rain, bumps, and highway vibration without killing your phone’s camera.
I’m Min Islam — the founder and writer behind Trending Car. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Whether you ride a cruiser, adventure bike, or sport tourer, the right motorcycle phone mount with wireless charger depends on how it fits your bars, how fast it charges, and how well it protects your phone from vibration.
Our Picks at a Glance
How To Choose The Best Motorcycle Phone Mount with Wireless Charger
A bad mount means fumbling with wires at stoplights or picking phone pieces off the asphalt.
Charging Speed and Power Delivery
Look for a mount that delivers at least 15W to your phone wirelessly, because GPS and screen-on music drain battery fast. A USB-C PD port (Power Delivery — a faster charging standard) in the 30W range lets you top up a second device or plug in when wireless is too slow. The mount must keep up with your phone’s power draw, not just trickle-charge.
Vibration Dampening and Camera Protection
Motorcycles generate high-frequency vibration that can destroy a phone’s optical image stabilization (a tiny gyroscope that keeps your camera steady). A mount with a vibration dampener — a rubber or gel insert that absorbs those shakes — is non-negotiable if you want your camera to survive long rides.
Mount Security and Bar Fit
The mount needs to clamp to your handlebar diameter (usually 0.875″ to 1.25″) and stay tight even on rough trails. An aluminum base with a positive lock (a mechanism that clicks shut and won’t loosen over time) beats plastic every time. Anti-theft screws matter if you park in public — they stop someone from walking off with your whole mount in seconds.
Quick Comparison
| Model | Best For | Wireless Charge | PD/USB-C Output | Vibration Dampener | Amazon |
|---|---|---|---|---|---|
| BRCOVAN M26-A1★ Best Overall | All-around performance | Qi 15W | 36W PD | Yes | Amazon |
| iMESTOU B0DYNT8Q2NBest Value | Budget value with case-friendly fit | Qi 15W | 20W USB-C | No | Amazon |
| Kewig M22Top Performer | One-touch auto-lock speed | Qi 15W | 20W USB-C | No | Amazon |
| GIYOKAJU Motorcycle Phone Mount | Built-in sunshade for visibility | Qi 15W | 15W PD | Yes | Amazon |
| iMESTOU B096SGJPWT | Dual power source flexibility | Qi 15W | 20W USB-C | No | Amazon |
| X-Energy MPMWC | High-watt charging with 304 stainless build | Qi 15W | 36W PD QC3.0 | Yes | Amazon |
| SERALI ADV-R1200GS | BMW Garmin base replacement | Qi 15W | 5V 2A USB-A | No | Amazon |
| Kewig M33-A1 | 36W PD port for fastest device charging | Qi 15W | 36W PD | Yes | Amazon |
| Tackform BM0015-ADV-CH | Premium build for oversized custom bars | Qi 15W | USB/SAE cable | Yes | Amazon |
In‑Depth Reviews
1. BRCOVAN Motorcycle Phone Mount with Qi Wireless & USB-C Charger
Our pick — 4.5★ from 750+ verified ratings; the strongest balance of quality and price.
The crowd favorite that survives arctic cold and charges two devices at once.
This is the one nearly 800 buyers have put through the real wringer — riders report that it has survived everything from -37°F to 100°F+ conditions, and the consensus is that the build quality and ease of installation win people over. The wireless charging puts out up to 15W (Qi standard, which is the universal wireless charging technology in phones), and the USB-C PD port can push 36W — enough to charge a second phone or a GoPro far faster than the competition. Buyers report it automatically turns on and off with the ignition, so you are not chasing a parasitic drain.
The main body uses PA66+GF30% (a glass-fiber-reinforced nylon) with 304 stainless steel telescopic arms, and the handlebar base is aluminum alloy. It fits handlebars from 0.5″ to 1.26″ in diameter, and the package even includes a rear-view mirror mount. The anti-shock design absorbs handlebar vibration before it reaches your phone’s camera. At 4.5 stars from over 750 ratings, the catch is that the power brick clips onto the mount and can feel like an afterthought, and a few owners have had the on/off button stop working after a year of garage-kept use.
Unlike the Kewig M22 below, the BRCOVAN includes a dedicated PD port at 36W, compared to the Kewig M22’s 20W USB-C port, making it the faster option if you need to actually gain battery percentage while running GPS and music.
The Reason to Buy
- Charges two devices at once via wireless (15W) and PD USB-C (36W)
- IP66 waterproof rating withstands heavy rain
- Built-in vibration dampener protects your phone’s camera
The Real Trade-Off
- Power box is bulky for smaller handlebars
- Anti-theft screws can be a nuisance if you need to remove it often
Grab this if: you want the most proven all-rounder that charges fast, survives weather extremes, and protects your camera from vibration.
Think twice if: you have limited handlebar space — the power brick adds visual bulk.
2. iMESTOU Motorcycle Wireless USB C Charger Phone Mount
A no-fuss mount that charges through thick cases and holds tight at 90 mph.
The iMESTOU delivers above its price tier with a design focused on fit. The four clamp arms grip phones up to 7.2 inches, and the sloping body prevents friction damage to your camera bump — a smart detail the others miss. Owners praise how easily it handles an iPhone 16 Pro Max with a heavy-duty case, and the wireless charging fires right through it.
It works with 12V-24V motorcycles and includes a detachable SAE-O ring wire that you can wire to the key-on circuit, avoiding battery drain. The anti-water switch saves electricity when parked. The catch: a few owners mention the included handlebar clamp is too narrow for oversized bars (needs a bigger clamp for 1.6″ tubes). Build quality earns consistent praise, and at this price you get solid value without cutting corners on the charging circuit.
Who it fits: Riders who want a simple, secure mount that charges through a bulky case while staying affordable.
One real catch: The standard clamp doesn’t fit oversized aftermarket bars — check your diameter before buying.
3. Kewig Motorcycle Phone Mount Qi 15W Wireless & USB C 20W Fast Charging
One-second auto-lock mechanism that riders on Harley’s love for its rock-solid fit.
The Kewig M22 stands apart with its one-push automatic lock and quick-release system — tap your phone in and it locks instantly; squeeze the sides to pop it out. It is a genuine one-hand operation at a stoplight. The wireless output hits 15W max, and the USB-C port pushes 20W. The mount fits phones from 4.0 to 6.9 inches.
What buyers really appreciate is the two-ways-to-power design. You can hardwire it to the bike’s electrical system using the SAE harness, or plug into a USB port with a fast-charging protocol using the included USB harness. The handlebar base is aluminum alloy and fits 0.5″, 0.87″, 1.0″, and 1.26″ bars. Riders on 2024 Harleys specifically note the fit is perfect. The function is praised most — 40 call it out — and the charging capability is second at 31. The honest trade-off: the button mechanism uses a plastic pen-clicker design that could be a long-term failure point, though two springs provide a failsafe even if the button breaks.
The Standout Feature
- One-push auto-lock is the fastest mount/dismount in this list
- Dual power sources — hardwire or plug into a USB port
- Sturdy aluminum base with a failsafe two-spring design
The Downside
- Plastic button mechanism may wear over time
- Mirror mount is plastic instead of metal
Reach for this if: you value instant one-hand phone access and want the flexibility of both hardwire and USB power input.
Look elsewhere if: you want a mirror mount that matches the bar mount’s all-metal quality.
4. GIYOKAJU Motorcycle Phone Mount with 15W Wireless & PD/USB-C Quick Charger
The only mount here that shades your screen from glare and charges three gadgets at once.
This mount comes with a removable sunshade that blocks some sunlight, making your phone screen clearer on bright days, plus a USB-A port alongside the PD/USB-C and wireless pad — three charging points total. The wireless output hits Qi 15W, while the PD port maxes at 15W and the USB-A port delivers 5V/3A.
The vibration dampening comes from two large cushioned silicone pads on the mount base and soft silicone on the handlebar clip. The double-socket arms with dual 1″ balls give you 360° rotation in two axes, so you can tilt the phone exactly where you want it. Buyers call the build quality exceptional — 34 call it out — and note the sunshade works well for both sun and rain. The mixed feedback centers on the wireless charger itself, with some units failing, and the cable length being too short for certain bar setups. The maker stands behind it, with one buyer getting a replacement that worked fine.
Best for: Riders who battle direct sunlight on their route and need more than one charging port for accessories.
Know before you buy: A few owners had wireless charging fail from the start — test it immediately.
5. iMESTOU Motorcycle Wireless Phone Mount Charger
A veteran model that riders wire permanently to the battery and trust for years.
This iMESTOU version gives you a choice: wire it to your 12V/24V battery for both wireless and USB-C charging at the same time, or plug it into a USB-A socket for wireless-only. The three-way switch on the back lets you turn the whole thing off, preventing battery drain when parked. Customers note wiring it directly to the battery and reading maps without bounce or grip loss at highway speeds.
The body is aluminum alloy with stainless steel clamping arms. It fits handlebars from 0.86″ to 1.26″ and phones from 4.0 to 7.0 inches. The wireless charging is 15W and the USB-C port outputs up to 20W. The compatibility with different phones and mounts is the most-praised aspect — 14 call it out. The recurring note is that the plastic corner grips can break over time, and a few riders found the unit drains the battery if you forget the three-way switch on. For the price, owners buy it for multiple bikes.
Who this suits: Riders who want a proven, straightforward mount they can hardwire once and forget about.
The catch: Mechanical parts can degrade over a couple of years; keep the switch off when parked.
6. X-Energy Motorcycle Phone Mount with 15W Wireless & 36W PD QC3.0
A charger that actually gains battery percentage while you navigate and stream music.
The X-Energy packs a 15W wireless pad and a 36W USB-C PD QC3.0 port (Qualcomm Quick Charge 3.0, a fast-charging standard for Android phones) that one owner reported bringing their phone from 67% to 91% in 30 minutes with maps and music running. That kind of throughput is rare at this tier. The body uses 304 stainless steel telescopic rods and a special vibration dampener module that absorbs high-frequency shakes.
The handlebar base is aluminum with a non-slip universal ball joint that stays tight through 360° adjustment. It fits 0.71″ to 1.26″ handlebars and phones from 4.7″ to 7.2″. After a year of use, reviewers point out it still works great. The biggest downside: it requires a direct battery connection instead of an SAE cable, which complicates using a battery tender. The power switch indicator is also hard to see in daylight. For the charging speed and sturdy build, it justifies its spot in the mid-premium tier.
The Charging King
- 36W PD QC3.0 port is the fastest wired charging in this list
- 304 stainless steel rods and vibration dampener protect your phone
- Double ball joints give full portrait/landscape flexibility
The Trade-Off
- Direct battery connection complicates adding a battery tender
- Power switch indicator is hard to see in bright light
Grab this if: you need serious charging throughput that actually outpaces your phone’s power draw on long rides.
Think twice if: you use a battery tender and want quick-disconnect wiring.
7. SERALI Motorcycle GPS Mobile Phone Wireless Charging Navigation Bracket
A drop-in replacement for the Garmin nav base on BMW GS and S-series bikes.
This mount is purpose-built for BMW motorcycles that come with a “GARMIN” navigation base — models like the R1300GS, R1200GS, R1250GS, and S1000XR. It clicks directly into that factory mount, so you do not need handlebar clamps. It fits phones from 4.2″ to 6.5″ and provides Qi 15W wireless charging plus two USB-A ports at 5V/2A each. The IPX6 waterproof rating (protected against powerful water jets) means heavy rain is not an issue.
Owners on the R1300GS and R1200RT report it works as expected, though the red tab that releases the phone can be stiff and phones with thick cases may not seat fully. The biggest real-world issue: in hot climates like California and Arizona, the phone can overheat quickly when charging while running GPS, causing the phone to shut down navigation. That is not the mount’s fault — it is the phone protecting itself — but it is worth knowing if you ride in extreme heat. The plastic build looks less premium than the BMW accessory it replaces, but functionally it gets the job done.
Best for: BMW owners with a Garmin nav base who want a quick-swap phone mount with charging.
The honest limit: Phone overheating in direct sun + GPS + charging is a real risk in hot regions; consider a sunshade.
8. Kewig Motorcycle Phone Mount with Qi 15W Wireless & 36W PD Fast Charging
A refined Kewig with a 36W PD port and anti-theft that stymies quick-fingered thieves.
This M33-A1 model builds on the Kewig formula with a higher-powered 36W PD port (same as the BRCOVAN’s output) and a full anti-theft system. After installation, you insert a security screw and snap on a cover — nobody can loosen the mount without that special wrench. The wireless pad does 15W Qi, and the vibration dampener sits inside the cradle.
The half-enclosure design does not block your phone’s camera, so you can record ride footage without dismounting. It fits handlebars from 0.875″ to 1.26″ and phones with a diagonal of 5.4″ to 7.2″ (max thickness 0.55″). The build quality gets strong marks — “well built and easy to install” — and the 36W port makes this a serious contender for power users. The catch: there is no power switch, so you must wire it through an ignition-switched circuit or risk parasitic drain. A few owners say it is “not vibration proof but of good quality,” so it reduces vibration rather than eliminating it entirely.
Standout Feature
- 36W PD USB-C port for fast charging a second device
- Anti-theft screw prevents mount removal without the special tool
- Camera unobstructed for ride recording
What’s Missing
- No power switch — requires ignition-switched wiring
- Vibration dampening is good but not total isolation
Reach for this if: you park in public and want anti-theft protection plus a 36W fast-charging port.
Look elsewhere if: you need a power switch to avoid having to wire to the ignition circuit.
9. Tackform Aluminum Motorcycle Adventure Phone Mount
A billet-aluminum tank of a mount built for oversized custom bars and lifetime ownership.
The Tackform Adventure cradle is machined from solid billet aluminum with real chrome plating — it weighs like a premium part and feels like it in the hand. It is the only mount here that fits 1-1/4″, 1-3/8″, and 1-1/2″ handlebars from the start, making it the pick for custom bars from Factory 47, KST Kustoms, and Bandit Bars. The wireless charging supports 15W, 10W, 7.5W, and 5W modes, and you can power it via USB (included cable) or hardwire it with the included SAE cable.
The vibration dampening reduces high-frequency vibration to protect your phone’s optical image stabilization. Buyers call it “dependable” and “built like a tank,” with one noting the charging was intermittent until a call from the manufacturer fixed it — they actually called the customer on the phone. The price is the highest here, and the wireless charging can be finicky (the phone must be perfectly centered). A few owners found their phone doesn’t support wireless charging at all, which is a compatibility check, not a flaw. For riders with thick aftermarket bars who want a mount that might outlast the bike itself, this is the endgame.
Best for: Riders with 1.5″ custom handlebars who want the strongest possible construction and a lifetime warranty.
The honest reality: Expensive, and wireless charging requires exact phone centering to avoid drop-outs.
Understanding the Specs
Qi Wireless Charging and Wattage
Qi is the universal standard for wireless charging in phones. The number — 5W, 7.5W, 10W, or 15W — tells you how fast power flows. 15W is the fastest commonly available in mounts like these, and it can keep your phone topped up during GPS use. Lower wattages may only maintain the battery level, not actually charge it. Your phone must also support Qi wireless charging; older or budget models may not.
PD/USB-C Power Delivery
PD stands for Power Delivery, a fast-charging standard that works over USB-C. It can push 15W, 20W, or 36W depending on the mount. A 36W PD port charges a smartphone from empty to full much faster than standard USB-A. Some mounts let you charge a phone wirelessly and a second device (like a GoPro or power bank) through the PD port at the same time. Just match the output to what your device supports.
Vibration Dampening
Motorcycles vibrate, and that high-frequency shake can destroy a phone’s optical image stabilization (OIS) — the tiny gyroscope that keeps your photos steady. A vibration dampener is a rubber or gel insert that absorbs those frequencies so the phone sees less vibration. Not all mounts have one, and some reduce vibration rather than eliminating it. If you care about your phone’s camera, this matters more than any other spec.
IP Waterproof Ratings
IP stands for Ingress Protection. IP66 means the mount is dust-tight and protected against powerful water jets (heavy rain). IPX6 means only the water protection is rated (no dust rating). If you ride in the rain, look for an IP rating of IPX5 or higher — lower ratings may fail. The rating applies to the mount and charging circuitry, not your phone, which should have its own water resistance.
FAQ
Will a motorcycle phone mount with wireless charger drain my battery when parked?
Does the vibration dampener really protect my phone camera?
Can I use a phone case with a wireless charging mount?
What is the difference between 15W and 36W PD charging?
Will this mount fit my 1.5 inch handlebars?
How do I know if my mount is charging wirelessly?
Can I mount it on the rear-view mirror instead of the handlebar?
Is it safe to use wireless charging in the rain?
What does anti-theft mean on a phone mount?
Why does my phone get hot while charging and navigating?
Final Thoughts: The Verdict
For most people, the motorcycle phone mount with wireless charger winner is the BRCOVAN M26-A1 because it combines the best charging speed (15W wireless + 36W PD), full IP66 weather protection, a proven vibration dampener, and a crowd-rating that over 750 owners have confirmed with real miles. If you want the fastest wired charging and a rock-solid build, the X-Energy MPMWC delivers a 36W PD QC3.0 port that actually gains battery percentage under full load. And for riders with oversized 1.5-inch handlebars who prioritise premium construction, the Tackform Adventure is the billet-aluminum endgame backed by a lifetime warranty.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Trending Car earns from qualifying purchases. This does not affect which products we feature.