Our readers keep the lights on and my garage snacks stocked. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A low profile floor jack solves one problem first: your car sits too low for a standard jack to fit underneath. If you drive a sedan, a sports car, or a lowered truck, you already know the frustration of wedging a jack under the bumper. The picks here get under as little as 3 inches of clearance, lift reliably, and keep you safe while you work.
I’m Min Islam — the founder and writer behind Trending Car. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Whether you are a weekend DIY mechanic or you swap tires between seasons, the right low profile floor jack is the difference between a frustrating hour under the car and a clean thirty-minute job.
Our Picks at a Glance
How To Choose The Best Low Profile Floor Jack
A floor jack is a safety tool first. The right one fits under your car, lifts it high enough for jack stands, and holds steady while you work. Here is what to look at before you buy.
Minimum Height vs. Your Car’s Clearance
The single most important number is the minimum height — how low the jack sits when fully lowered. Most standard cars sit around 5 to 6 inches off the ground, but lowered or sporty models can drop to 3.5 inches or less. A low profile jack with a minimum height at or below your car’s front chin is the only safe way to get the saddle under the frame rail. Check your car’s ground clearance first, then match it to the jack’s minimum height spec.
Lift Range and Capacity
Capacity is measured in tons — 1.5 tons (3,000 lbs) works for most sedans, while 3 tons (6,600 lbs) handles trucks, SUVs, and vans. The lift range tells you how high the jack can raise the vehicle. A longer range means you can lift higher onto jack stands, which gives you more room to work under the car. Look for a max height that exceeds the height of your jack stands by a few inches so you can raise the vehicle onto them without the jack hitting the frame first.
Dual-Piston Quick Lift Systems
A dual-piston pump lifts the vehicle faster with fewer handle strokes. Instead of pumping the handle 20 or 30 times to reach full height, a dual-piston jack can do it in 5 to 8 strokes. This saves time and energy, especially if you are working on multiple vehicles or swapping tires in a driveway. Single-piston jacks are cheaper and lighter, but they take longer to raise the load.
Construction Materials and Weight
Steel jacks are heavier and more durable but harder to move and store. Aluminum or aluminum-and-steel hybrids are lighter and easier to carry to the job site. The trade-off is that lighter jacks often have lower capacity or a shorter lift range. If you plan to keep the jack in a fixed garage spot, a heavy steel model is fine. If you take it to the track or store it in a trunk, a lighter hybrid is a better fit.
Quick Comparison
| Model | Best For | Capacity | Min / Max Lift | Weight | Amazon |
|---|---|---|---|---|---|
| Jack Boss 3 Ton★ Best Overall | Best Overall | 3 tons / 6,600 lbs | 3-15/16″ / 18-5/16″ | 58.5 lb | Amazon |
| Torin TAM815016LTrack Ready | Lightweight Pick | 1.5 tons / 3,000 lbs | 3-1/2″ / 14-1/8″ | 33.6 lb | Amazon |
| LARBANKE 3 TonLong Lift Range | Great Lift Range | 3 tons / 6,600 lbs | 3.15″ / 18.31″ | — | Amazon |
| VEVOR 3 Ton | Highest Max Lift | 3 tons / 6,600 lbs | 3.35″ / 19.69″ | 73 lb | Amazon |
| AV Steel 3 Ton | Top Rated Value | 3 tons / 6,600 lbs | 3-1/8″ / 19-7/8″ | — | Amazon |
| GEARWRENCH 3.5 Ton | Maximum Capacity | 3.5 tons / 7,000 lbs | — / — | 101 lb | Amazon |
| LiftMaster 3 Ton | Ultra Low Entry | 3 tons | 3″ / 19.7″ | 72.8 lb | Amazon |
| BIG RED 3 Ton | Premium Steel Build | 3 tons / 6,600 lbs | 3.125″ / 20″ | — | Amazon |
In‑Depth Reviews
1. Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack
Our pick — 4.5★ from 700+ verified ratings; the strongest balance of quality and price.
The hybrid that is strong enough for a full-size SUV yet low enough for a sedan.
You get a 3-ton (6,600 lb) capacity that handles SUVs, minivans, and heavy sedans — double the Torin TAM815016L’s 1.5-ton limit. The minimum height is 3-15/16 inches, so it fits under most lowered cars, and it reaches up to 18-5/16 inches at full extension, giving you room to slide jack stands underneath.
The dual-piston quick lift pump speeds up the job. Buyers report they “rotated all four tires in 30 minutes,” which tells you how fast this jack gets the car up. At 58.5 pounds, it is noticeably heavier than the Torin at 33.6 pounds — at 58.5 pounds versus the Torin at 33.6 pounds, but the extra weight comes from the welded steel frame that makes it feel solid under load. The aluminum billet construction keeps the total weight manageable enough to carry from the garage to the driveway.
The rubber saddle protects your car’s frame from scratches, and the steel casters with swivel front wheels make steering it under the vehicle smooth. It meets ANSI/ASME PASE safety standards, and there is a limited 1-year manufacturer warranty. If you need one jack that can do everything from a low sports car to a family SUV, this is it.
What makes it stand out
- 3-ton capacity handles trucks and SUVs easily
- Dual-piston quick lift reaches height in few strokes
- Low 3-15/16″ minimum fits under lowered vehicles
One thing to know
- At 58.5 lb it is heavier than lightweight aluminum-only jacks
Reach for this if: you own a mix of vehicles from low sedans to SUVs and want one jack that covers all of them.
Look elsewhere if: 58.5 lb is too heavy to carry between cars or store in a trunk.
2. Torin TAM815016L Hydraulic Low Profile Aluminum and Steel Racing Floor Jack
The lightweight racer that is easier to move than a cheap Walmart jack.
At just 33.6 pounds, this Torin is one of the lightest low profile jacks in the lineup. The aluminum and steel construction cuts weight without making it flimsy. Owners mention it is “slightly heavier than cheap Walmart jack, but easier to move,” which matches the feel — the wheels roll smoothly and the side carry handle makes lifting it into a trunk or track box simple.
The trade-off is capacity. It lifts 1.5 tons (3,000 lbs), so it works for most sedans and coupes but does not have the headroom for a heavy SUV or truck. The lift range goes from 3-1/2 inches minimum to 14-1/8 inches maximum — a 29% less gap than the Jack Boss which hits 18-5/16 inches. That shorter max height means you need shorter jack stands or you cannot lift the vehicle as high. For quick tire changes, oil changes, and brake jobs on a standard car, it is plenty.
The dual-piston pump reaches full height in just 5 strokes, which is fast. The 37.2-inch long handle has a two-stage detachable design for compact storage. The foam handle bumper and rubber pads protect your vehicle’s frame. It also includes a built-in safety overload system that prevents use beyond its 1.5-ton load capacity. This is a great option for the weekend track driver who needs a portable jack that travels light.
The light side
- 33.6 lb is easy to carry and store
- Dual pump reaches full height in 5 strokes
- Low 3-1/2″ minimum slides under low cars
The limit
- 1.5-ton capacity maxes out on smaller cars
- 14-1/8″ max lift limits jack stand height
Your pick if: you carry the jack to the track or store it in a compact space and only work on cars under 3,000 lbs.
Not the one if: you need to lift a heavy SUV, truck, or any vehicle over 1.5 tons.
3. LARBANKE 3 Ton Low-Profile Hydraulic Floor Jack
A low entry point and a high ceiling make this jack unusually versatile.
The LARBANKE starts at a true 3.15 inches minimum height, low enough for most lowered sports cars. It extends to 18.31 inches maximum, so you can lift a sedan high enough to slide 11-inch jack stands underneath. Buyers confirm the “lift height sufficient for 11″ stands,” which is right in the balance for comfortable under-car work. The 3-ton (6,600 lb) capacity means it handles everything from a compact hatchback to a full-size SUV.
It uses a dual-piston hydraulic pump that lifts fast and smooth. The 360-degree rotatable saddle is detachable and replaceable, so you can swap it out if it wears over time. The frame uses heavy-duty steel and high-strength carbon, keeping it portable while staying tough. The 4-wheel system has two large steel front casters and two 360-degree swivel casters at the back, making it easy to steer into position. Customers note it lifts a GMC Envoy without strain and fits both a BMW X5 and a Mercedes E-Class without issues.
The handle is removable for storage, and the foam bumper protects the vehicle’s body panels. It is built for regular use in a home garage or a small professional shop. The only caution from reviewers is that the single pump requires a bit more force than expected, but the overall reliability and range make it a strong value at its price point.
Strong points
- 3.15″ minimum height fits very low cars
- 18.31″ max lift works with tall jack stands
- 3-ton capacity handles trucks and large SUVs
Consider this
- Single pump requires more handle force than dual-piston jacks
Grab this for: the widest lift range in the mid-price tier — it goes low enough for a lowered BMW and high enough for a lifted truck.
skip it if: you need a jack that lifts with very light handle effort.
4. VEVOR 3 Ton Low Profile Floor Jack
The heaviest hitter that lifts higher than most jacks in its class.
The VEVOR stands out for its maximum lift height of 19.69 inches — nearly 20 inches of reach. That is enough to raise a truck or SUV high enough for extra-tall jack stands, giving you excellent clearance underneath. The minimum height is 3.35 inches, so it slides under most low-clearance cars. It lifts a full 3 tons (6,600 lbs), matching the capacity of the Jack Boss and the LARBANKE above.
At 73 pounds, this is a heavy jack. The all-steel construction makes it durable, but you will not want to carry it far. The dual parallel pump system lifts to full height in 7 strokes, which is fast. The 52-inch long handle uses leverage to make lifting easier, and the two-piece handle disassembles for storage. Reviewers point out it “rolls smoothly, fits under low vehicles, lifts trucks/SUVs” and call it a “solid, well-built” jack. Some shoppers say the paint quality is poor, flaking off easily, and that the first quarter of the pump stroke does not engage. Still, the functional performance gets consistent praise.
The 360-degree rotatable saddle is detachable and replaceable. The foam handle bumper and rubber saddle protect your vehicle. It meets CE, UKCA, and ASME PALD-2014 safety standards, and the built-in safety load system prevents use beyond its capacity. The sealing system is designed for long-term leak resistance. If you need maximum lift height and do not mind the heft, this jack delivers.
What it does best
- 19.69″ max lift is the highest in this group
- 7 strokes to full height with dual pump system
- 3-ton capacity with safety overload protection
The catch
- 73 lb is heavy to move; paint finish chips easily
Reach for this if: you lift trucks or SUVs and want the extra inches of clearance for working underneath.
Not your jack if: you need something portable to carry between garages or store in a small space.
5. AV Steel Low Profile Floor Jack 3 Ton
A value pick with a 4.7-star average and a lift range that almost matches the premium picks.
The AV Steel earns a 4.7 out of 5 rating from buyers, and the specs back up the numbers. It lifts 3 tons (6,600 lbs), with a minimum height of 3-1/8 inches and a maximum height of 19-7/8 inches. That range is nearly identical to the VEVOR’s 19.69 inches, but it gets under lower vehicles with its shorter minimum. It is built from heavy-duty alloy steel and uses dual piston pumps for rapid lifting with fewer strokes.
The 360-degree rotatable saddle is designed to protect your vehicle’s frame, and the overload protection system adds a safety buffer. Buyers report it is “strong enough to lift the whole front end of the SUV to max height no problem.” The main caution from reviewers is that the handle is spring-loaded and automatically returns to an upright position — if it pops out while under the car, it can be hard to reinsert. Also, some units arrived with damaged packaging, so inspect the box on delivery. The 1-year warranty and 24/7 customer service give you a safety net.
This is a well-rounded jack that competes directly with more expensive models on lift height and capacity. If you are budget-conscious but do not want to compromise on features, the AV Steel delivers a lot for the money.
Value highlights
- 3-1/8″ min and 19-7/8″ max lift matches premium jacks
- 4.7-star average from 182 ratings
- 3-ton capacity with overload protection
Watch for
- Spring-loaded handle can pop out and be hard to reinsert
- Packaging may arrive damaged based on buyer reports
Best for the budget-minded: you get the same lift range as premium steel jacks at a lower entry point.
Not ideal if: you want a jack with a fixed handle that never comes loose under load.
6. GEARWRENCH 3.5 Ton Low Profile Floor Jack
The only 3.5-ton jack here, built for the heaviest lifting in a professional shop.
The GEARWRENCH tops the capacity chart at 3.5 tons (7,000 lbs), making it the strongest jack in this lineup. It is built from forged steel and weighs in at 101 pounds — the heaviest here, and it feels like it. Owners mention it “frequently lifts Suburbans with zero issues” and that it “glides smoothly on its wheels.” The dual piston fast lift system provides consistent lifting power under heavy loads, and the protected handle design keeps it from banging into your car’s body panels.
The minimum height is not listed in the specs, but some customers note the base is taller than older jacks, so it may not fit under extremely low sports cars. One reviewer says it works fine under an SUV but struggles under lower cars. The rubber saddle grips the vehicle frame and prevents scratches. It meets ASME PASE-2019 safety and performance requirements, and comes with a 1-year manufacturer warranty.
This is a heavy-duty shop jack meant for trucks, vans, and full-size SUVs. If you work on heavy vehicles professionally, the extra capacity and stable platform are worth the weight and the premium price.
Professional strength
- 3.5-ton capacity handles Suburbans and heavy trucks
- Dual piston lift system is powerful and consistent
- Forged steel construction is extremely durable
Trade-offs
- 101 lb is very heavy to move; base may not fit low cars
Your jack if: you need the strongest lift available for heavy trucks and large SUVs in a fixed shop location.
Not for you if: you work on low-clearance sports cars or need a jack you can easily carry around.
7. LiftMaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack
A full 3 inches of minimum height to slide under the lowest cars on the road.
The LiftMaster has a minimum height of just 3 inches, which is lower than any other jack on this list. That makes it the go-to choice for lowered sports cars, track cars, and any vehicle that sits unusually close to the ground. It lifts to 19.7 inches maximum, so once it is under the car, it can still get it high enough for standard jack stands. The 3-ton capacity means it handles SUVs and trucks too, despite its ultra-low entry.
It uses a dual pump system that saves effort compared to single-piston jacks. The two-piece knurled steel handle has a foam bumper to prevent damage to your vehicle. The rubber saddle is strengthened for better grip and friction. Reviewers point out it “lifts car in 8 pumps” and “holds height for 30 minutes with no leakage,” which speaks to the hydraulic seal quality. One reviewer noted it works well on a Ford Expedition after three years of daily mechanic use, which is a strong durability vote.
At 72.8 pounds, it is not a portable jack, but the low profile and high lift combination is rare. The broad plate with a removable pad reduces the chance of slipping. Some buyers mention the packaging arrives beat up, but the product is usually undamaged. If your car sits at 3.5 inches or less off the ground, this is the jack to get.
Ultra-low strength
- 3-inch minimum height fits extreme low-clearance cars
- 19.7-inch max lift works with tall jack stands
- 3-ton capacity is enough for SUVs and trucks
What to know
- Some units have wheels that jam from old grease
- Heavier than aluminum hybrids at 72.8 lb
Perfect for: anyone with a truly low car who also needs the reach to lift it high for under-body work.
Pass on this if: your car has standard clearance and you prefer a lighter jack.
8. BIG RED 3 Ton Low Profile Hydraulic Floor Jack
A near-perfect 4.9-star rating and a 20-inch max lift that beats every other steel jack here.
The BIG RED has the highest maximum lift in the entire lineup at 20 inches, edging out the VEVOR by a fraction of an inch. The minimum height is 3.125 inches, so it slides under most low-clearance vehicles. It lifts 3 tons (6,600 lbs) using a dual-piston hydraulic system that reaches full height in just 7 strokes. The all-steel construction is industrial-grade, with a safety overload valve to prevent overloading.
Buyers give it a 4.9 out of 5 rating from 20 reviews, with comments that it “glides across the floor” and is “strong and sturdy.” The large rubber saddle and foam handle bumper protect the vehicle from scratches. The slow-release valve prevents sudden drops, which is important for safety. The 52-inch detachable handle is convenient for storage, and it comes with a magnetic tool tray for holding bolts and sockets while you work. It is ASME PALD-2014 certified and includes a 1-year warranty.
The main drawback is weight. Shoppers say it is “heavy but uses weight well” and is “not compact for storage.” The fixed handle allows quick pressure release without a separate bleed valve, which simplifies operation. If you want a premium steel jack that lifts higher than nearly any other and does not mind the bulk, this is the one.
Premium features
- 20-inch max lift is the highest in this group
- 7-stroke dual pump is fast and efficient
- Includes magnetic tool tray for convenience
What holds it back
- Heavy steel construction is not portable
- Larger footprint takes up storage space
Choose this for: the highest lift height in the lineup with a premium build that feels like it will last a decade.
Think twice if: you need a compact, portable jack that tucks into a small trunk or shelf.
Understanding the Specs
Minimum Height
This is the lowest point the jack sits at when fully down. It determines whether the jack will physically fit under your car’s front bumper or side skirt. A standard car has about 5 to 6 inches of ground clearance, but lowered cars can drop to 3 inches or less. If the jack’s minimum height is higher than your car’s clearance, you will not be able to slide it under the frame rail at all. Always check your car’s ground clearance and buy a jack with a minimum height at or below that number.
Dual Piston Quick Lift
A dual-piston pump has two hydraulic cylinders working together. Each pump of the handle moves the saddle up twice as fast as a single-piston jack. That means you reach full lift height in 5 to 8 strokes instead of 15 to 25. The trade-off is that dual-piston jacks tend to be heavier and more expensive. For fast tire rotations and oil changes, the extra speed is worth it. For occasional use, a single-piston jack can still get the job done.
FAQ
How low does my car need to be to need a low profile floor jack?
Can I use a 3-ton jack on a small sedan?
What is the difference between a low profile jack and a standard floor jack?
How many strokes does a dual-piston jack take to reach full height?
Is a steel or aluminum floor jack better?
How do I know if a low profile jack will fit under my car?
Can I use a low profile jack on a truck or SUV?
What is the safety overload system in a floor jack?
How long does a hydraulic floor jack typically last?
Can I use a low profile jack without jack stands?
Final Thoughts: The Verdict
For most people, the low profile floor jack winner is the Jack Boss 3 Ton because it balances a low 3-15/16-inch entry with a 3-ton capacity and a reasonable 58.5-pound weight. If you want the lightest portable jack for track days, grab the Torin TAM815016L at 33.6 pounds. And for the max lift height to work under trucks and SUVs, the BIG RED 3 Ton stands out with a 20-inch max lift.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Trending Car earns from qualifying purchases. This does not affect which products we feature.