Dash Cam for Trucks Front and Rear | Best Picks for 2026

A front-and-rear dash cam for trucks records the road ahead and the area behind the vehicle, providing essential evidence for incident claims, driver coaching, and parking security.

For truck drivers and fleet managers, a single front-facing camera leaves a blind spot at the rear — exactly where backing incidents, rear-end collisions, and false claims happen. A dual-channel system covering both ends closes that gap. The best choice depends on whether you need a consumer-grade setup for your personal rig or a telematics-integrated commercial system for a fleet.

What a Front-and-Rear Dash Cam Does for a Truck

A dual-channel dash cam records two video streams simultaneously — one from a forward-facing lens and one from a rear-facing lens. In trucking, where the vehicle’s length creates unique blind spots and maneuvering risks, this configuration captures:

• The road ahead: traffic, lane changes, and forward collisions.
• The rear of the truck: backing events, tailgaters, and rear-end impacts.
• Parking and loading zones: many models include parking mode, which triggers recording when motion or impact is detected while the engine is off.

A related 3-channel setup adds an interior or cab-facing camera, which many fleet managers require for driver safety coaching and sleeper-berth security. For this article, we focus on the dual-channel front-and-rear configuration that answers the core requirement.

Key Features to Look for in a Truck Dash Cam

Buying guides consistently recommend at least 1080p resolution on both channels, reliable night vision for low-light driving, built-in GPS for speed and location logging, parking mode, and loop recording for continuous overwriting. Power compatibility matters in trucking: most trucks run a 12V or 24V electrical system, so verify the included power adapter or hardwire kit matches your vehicle’s voltage.

A high-quality truck dash cam typically starts at $150 and can reach $400–$500. Cheaper units under $50 often drop night vision, GPS, or reliable storage. Recording-only models split into three price bands: low-end ($50–100), mid-range ($100–200), and high-end ($200+). Commercial fleet systems like the Samsara CM32 add monthly service fees, which can change total cost of ownership significantly.

For a deep dive into models tested specifically for over-the-road truckers, see our full roundup: best dash cams for truckers reviewed.

Top Front-and-Rear Dash Cam Models for Trucks

The market offers two distinct tracks: consumer-grade dual-channel units and commercial fleet systems with telematics integration. The table below summarizes the most commonly recommended options, based on current specs and buyer feedback.

Installation Tips and Common Mistakes

Installing a dual-camera system in a truck is straightforward if you follow the right order: select the camera, determine optimal mounting locations, connect the power source, and test functionality. Confirm both cameras capture the intended angles and review sample recordings to verify clarity. The most frequent mistake is buying a front-only cam when front-and-rear coverage was the requirement — check the product listing for “dual channel” or “2CH” before purchasing.

Other common pitfalls include assuming 4K front video solves all evidence needs (rear view and night vision matter just as much), ignoring power compatibility with the truck’s electrical system, and overlooking whether the hardwire kit is included in the box. For fleet setups, treat consumer models as potentially unsuitable: verify app access, storage limits, and whether subscriptions add ongoing costs.

For legal and operational reasons, configure rear and interior recording in line with company policy and applicable privacy rules — a separate legal check is recommended for any system that records inside the cab.