Our readers keep the lights on and my garage snacks stocked. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A motorcycle cup holder faces a simple test: does your drink stay put when you hit a pothole, lean into a corner, or buzz down the highway at sixty? Most fail that test within the first mile. The ones that pass share a few specific design choices — a clamp that actually bites, a cradle deep enough for a tall tumbler, and a material that does not shiver apart over time. This guide breaks down the seven best options so you can pick one that holds your coffee, your water, or your soda without drama.
I’m Min Islam — the founder and writer behind Trending Car. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Everything you need to choose the right motorcycle cup holder is here — from clamp size and carrying capacity to real rider experiences that reveal which models survive rough roads and which ones shake loose.
Our Picks at a Glance
How To Choose The Best Motorcycle Cup Holder
Picking a cup holder sounds simple until you realize your bike’s handlebar thickness, your bottle’s diameter, and the kind of roads you ride all change the answer. Focus on these three things and you will land on the right one.
Clamp Size and Handlebar Fit
The clamp must match your handlebar or frame tube diameter. Most universal holders fit round bars from 0.5 inches to 1.57 inches. Measure your bar with a caliper or a ruler before buying — a clamp that is too wide wobbles, and one that is too narrow simply will not install.
Bottle Diameter and Load Capacity
A cup holder that claims to hold a 32-ounce bottle still needs to grip its diameter. Check the minimum and maximum diameter range (usually 1.95 inches to 3.6 inches). Load capacity matters too — a heavy 40-ounce steel bottle bouncing over bumps puts more stress on the clamp than the average coffee mug, so look for a tested weight rating that covers your daily drink.
Mounting Angle and Security
A 360-degree rotation lets you angle the cup holder so the bottle sits upright whether your bars are straight, curved, or riser-style. Some models add an anti-theft feature — a special tool or wrench that locks the clamp so it cannot be removed by hand — which is useful if you park your bike in shared spaces or leave accessories on when you run into a store.
Quick Comparison
| Model | Best For | Load Capacity | Clamp Range | Bottle Diameter | Amazon |
|---|---|---|---|---|---|
| FODSPORTS Upgraded★ Best Overall | Bottle versatility | 32 oz | 0.5″ – 1.57″ | 2.08″ – 3.6″ | Amazon |
| KEMIMOTO Crocodile-BiteBest Value | Secure grip | 28 oz | 0.6″ – 1.56″ | Up to 3.5″ | Amazon |
| Mathtoxyz Anti Theft | Extra-large drinks | 40 oz | 0.5″ – 1.57″ | 1.95″ – 3.6″ | Amazon |
| LOKTENWO Anti-Theft | Compact build | — | 0.5″ – 1.57″ | 1.95″ – 3.6″ | Amazon |
| Kewig Anti-Theft | Composite durability | 32 oz | 0.5″ – 1.57″ | 1.96″ – 3.5″ | Amazon |
| RAM Mounts Level Cup 16oz | Self-leveling tech | 16 oz | RAM B-size ball | 2.5″ – 3.5″ | Amazon |
| RAM Mounts Level Cup XL | Large tumblers | 32 oz | RAM B-size ball | Fits 32 oz containers | Amazon |
In‑Depth Reviews
1. FODSPORTS Motorcycle ATV Cup Holder
Our pick — over 4.5★ from 850+ verified ratings; the strongest balance of quality and price.
The aluminum alloy cup holder that actually locks a 32-ounce bottle in place on rough terrain.
The FODSPORTS holder covers the most ground in terms of fit. Its clamp accepts round tubing from 0.5 inches to 1.57 inches in diameter and square tubing up to 1.0 inch, so it works on motorcycles, ATVs, scooters, strollers, golf carts, and even wheelchairs. The adjustment knob at the bottom lets you resize the cradle from 2.08 inches up to 3.6 inches for anything from a slim water bottle to a wide coffee mug.
Buyers report that an insulated metal 32-ounce thermos fit securely and came out easily, with no wobble at highway speeds. The heavy-duty metal clamp includes rubber anti-slip pads that protect the handlebar from scratches while keeping the holder from sliding around. One trade-off: the aluminum gripper bar flexes slightly under load, and a few owners say it needs retightening every few hours of riding. At 32 ounces max capacity, it handles the most common bottle sizes without trouble, and the 360-degree rotation makes installation on oddly angled bars straightforward.
Holds tight, needs periodic snugging: The all-metal clamp and wide diameter range make this the most versatile pick, but if you ride all day without stopping, plan to give the knob a quick turn mid-ride.
Best for riders: who want a single cup holder that transfers between bikes, scooters, and even golf carts without buying extra mounts.
Look elsewhere if: you carry a 40-ounce tumbler daily — the 32-ounce limit is a hard ceiling here.
2. KEMIMOTO Motorcycle Cup Holder
A high-impact plastic body with a metal clamp that holds bottles up to 3.5 inches across.
The defining feature of this KEMIMOTO holder is its “crocodile-bite” clamp — a heavy-duty metal jaw with an anti-slip rubber pad that grips handlebars from 0.6 inches to 1.56 inches. The housing is a scratch-proof high-impact plastic rather than metal, which keeps weight down and prevents corrosion. It handles bottles from 12 ounces up to 28 ounces, with a maximum diameter of 3.5 inches, making it compatible with Hydro Flasks and Yeti cups.
One reviewer noted that the holder initially seemed flimsy for a 24-ounce steel bottle, but after mounting it very tight on an ATV front rack, it held securely over rough terrain without slipping. Another reviewer mentioned it will hold a 32-ounce bottle securely despite the stated 28-ounce limit. The 360-degree adjustable clamp allows you to rotate the holder to almost any angle, though you have to disassemble and reassemble it if you get the angle wrong during install. At 4.33″L x 3.15″W x 8.26″H, it sits taller than the LOKTENWO (3″L x 2.3″W x 5.9″H) — a 44% larger height, which matters for tall tumblers.
Why it works
- Scratch-proof plastic body resists corrosion
- Rubber-lined metal clamp grips bars without slipping
One real catch
- Angle adjustment requires full disassembly to change
A solid middle-ground: for riders who want a corrosion-resistant plastic holder with a strong metal clamp at a reasonable cost.
skip it if: you need a quick, tool-free angle adjustment — the reassembly process gets annoying mid-ride.
3. Extra Large Motorcycle Cup Holder Anti Theft, Mathtoxyz
The steel-bodied holder that handles a 40-ounce bottle without shaking loose.
Most cup holders top out at 32 ounces. The Mathtoxyz pushes that to a tested weight of 40 ounces — a 43% larger capacity than the KEMIMOTO’s 28-ounce limit. The body is made of alloy steel rather than plastic or aluminum, giving it extra rigidity for big steel bottles. The clamp fits the same wide range (0.5 inches to 1.57 inches) and uses a quick-adjust bottom button that lets you resize from 1.95 inches to 3.6 inches. Compared to the FODSPORTS, which starts at 2.08 inches, the Mathtoxyz grips bottles as narrow as 1.95 inches — a 7% tighter minimum diameter that fits slim water bottles.
Owners mention the clamp stays put even on rough rides. One reviewer wrote that the holder “didn’t fall off once from my Segway zt3 after rough ing it up street chaos potholes, cracks, sticks, running by squirrels didn’t shake it off.” The anti-theft design uses a specialized tool to lock the clamp, so it cannot be removed by hand — a useful detail if you park in public areas. The flared upper lips help guide a bottle in, and three rubber inserts grip the sides to prevent rattling. At 6.2 inches tall, it is shorter than the KEMIMOTO’s 8.26 inches but still holds tall tumblers securely.
Maximum capacity, minimal flex: The alloy steel build and 40-ounce rating make this the right choice for anyone who carries a half-gallon water jug or an extra-large coffee tumbler on long rides.
Reach for this if: your daily bottle weighs close to 40 ounces and you need a clamp that does not creep loose over a day of riding.
Not for you if: you prefer a lighter plastic holder — the steel body adds noticeable heft.
4. LOKTENWO Anti-Theft Motorcycle Cup Holder
The smallest clamp base in this lineup with a lockable knob that deters theft.
The LOKTENWO measures just 3 inches long by 2.3 inches wide by 5.9 inches high — noticeably more compact than the KEMIMOTO’s 4.33″L x 3.15″W x 8.26″H profile, with a 44% smaller height gap. That lower profile makes it a cleaner fit on bikes with limited handlebar space. The clamp fits the standard 0.5-inch to 1.57-inch bar diameter range and adjusts for bottles between 1.95 inches and 3.6 inches wide.
The anti-theft mechanism uses a special knob that locks with a dedicated wrench included in the package, so someone cannot unscrew it with bare fingers. Built-in TPU (thermoplastic polyurethane) pads on the clamp provide a strong grip on the bar and prevent scratching. A buyer with a Harley Ultra Classic reported the holder fit easily with extended handlebars and was simple to adjust and install. One owner noted the angle-adjustment teeth give many positions, but in some setups the cup can sit slightly tilted — a minor annoyance if you carry a full cup with no lid. The 1-year warranty from the manufacturer is longer than the 90 days offered by FODSPORTS or Mathtoxyz.
What it does best
- Low-profile design frees up bar space
- Lockable knob with included wrench prevents theft
The trade-off
- Angle teeth can leave the cup slightly tilted
Best for pack-it-tight: riders who run out of handlebar real estate and need a lockable, low-profile holder.
Consider another if: you need perfect vertical alignment at every angle — the teeth may not line up level on your particular bars.
5. Kewig Anti-Theft Motorcycle Cup Holder
A glass-fiber-infused composite holder that weighs 9.9 ounces and handles 32 ounces of drink.
The Kewig uses PA66+GF (nylon 66 reinforced with glass fiber) for the main body and aluminum alloy for the internal structure — a material combination that makes it lighter than all-steel holders while staying rigid. At 9.9 ounces, it is significantly lighter than steel-bodied alternatives but still holds a tested maximum of 32 ounces. The clamp fits 0.5-inch to 1.57-inch bars and adjusts for bottles from 1.96 inches to 3.5 inches wide.
Buyers consistently praise the build quality. One owner called it his third Kewig product and said the consistent quality makes him look for their parts first when accessorizing his bike. Another rider mounted it on a 2014 Honda CTX700 and said it holds a soda can up to a 32-ounce coffee mug with single-handed adjustment. The anti-theft wrench locks the clamp securely, and the 360-degree rotation lets you angle the cup without unmounting the base — a convenience the KEMIMOTO lacks. Like the LOKTENWO, it comes with a 1-year warranty, but the composite construction gives it a sleeker, less industrial look than steel models.
Light, strong, and well-finished: The composite body delivers metal-level rigidity at a fraction of the weight, with a clean matte-black look that suits modern bikes.
Who this fits: riders who want anti-theft security and a premium-looking holder without the heft of a full steel unit.
Look past it if: you carry bottles over 32 ounces — the tested limit is firm for daily hard riding.
6. RAM Mounts Level Cup 16oz Drink Holder
A gimbal-mounted 16-ounce holder that stays upright when your bike leans into a corner.
The RAM Mounts Level Cup uses a self-leveling mechanism (a pivoting gimbal that keeps the cup vertical regardless of bike angle) — a fundamentally different approach from the fixed-cradle holders above. It is designed for cups, cans, and bottles 2.5 inches to 3.5 inches in diameter, with a 16-ounce practical limit. The included medium double-socket arm and 1-inch RAM rubber ball attach to any RAM B-size base, giving you near-infinite adjustability for positioning.
This is the choice for riders who lean hard into turns or ride off-camber terrain where a fixed holder would spill your drink. Backed by a lifetime warranty from RAM Mounts, a brand known for heavy-duty vehicle mounts. However, the 16-ounce capacity rules out large water bottles, and several customers note that tall containers shift the center of gravity above the pivot point, making the cup tip over or the holder twist uncontrollably at highway speeds. One owner noted the holder broke before he could use it. For short, wide drinks like soda cans or standard coffee cups, the self-leveling works cleanly.
Why you would pick this
- Self-leveling gimbal keeps drinks vertical through leans and bumps
- Lifetime warranty from a trusted vehicle-mount brand
What limits it
- 16-ounce capacity is too small for large tumblers or bottles
- Not stable with tall, top-heavy cups
Ideal for short drinks: If you ride a sportbike or off-road and carry only a soda can or standard coffee cup, the self-leveling action is a genuine advantage — no other holder on this list offers it.
Not for big bottles: A 32-ounce hydro flask will overbalance the gimbal and likely dump your drink on a sharp turn.
7. RAM Mounts Level Cup XL Drink Holder
The same self-leveling idea scaled up to hold a 32-ounce bottle, with the same lifetime warranty.
The RAM Level Cup XL solves the main limitation of the standard 16-ounce model by accommodating 12-ounce cans, water bottles, and insulated containers up to 32 ounces. Like the smaller version, it uses a self-leveling gimbal and a 1-inch RAM rubber ball so it attaches to any B-size RAM arm or base. The high-strength composite body weighs 9.6 ounces, close to the Kewig’s 9.9 ounces.
A long-term buyer reported using this holder on three different bikes over thousands of miles without spills or bounce-outs, though he noted the plastic can break on rough roads if you carry the heaviest 32-ounce drinks. Other reviewers point out that the rubber grip tabs require super glue to stay in place — the included adhesive failed for several owners. The holder is also large and, when empty, tends to tip outward at the bottom because the gimbal pivots freely. For riders who already use RAM Mounts for phones or GPS units, this cup holder integrates into the same ball-mount system cleanly.
Self-leveling for big drinks, with two asterisks: The XL gimbal holds a full-size tumbler upright through corners, but the rubber grips need gluing and the pivot can wobble when empty at highway speed.
Reach for this if: you are already invested in the RAM Mount ecosystem and want a self-leveling holder that fits your existing ball mounts.
Think twice if: you want a no-fuss install — the extra step of gluing rubber tabs adds prep time before your first ride.
Understanding the Specs
Clamp Diameter Range
Every cup holder lists a clamp range — usually 0.5 inches to 1.57 inches. That number tells you the thickness of handlebar or frame tube the clamp can wrap around. If your bike has fat 1.5-inch bars, most universal clamps fit. If you have skinny 0.6-inch scooter bars, you still need a clamp that tightens down small enough to grip. Measure your bar with a caliper before ordering; guessing wrong means a wobbly holder that shifts around every time you hit a bump.
Bottle Diameter vs. Load Capacity
Two numbers that work together. Bottle diameter (usually 1.95 to 3.6 inches) tells you which cups physically fit inside the cradle. Load capacity (tested in ounces) tells you how much weight the clamp and cradle can support without flexing or breaking. A 40-ounce steel bottle at 3.5 inches diameter will stress a 32-ounce-rated holder much more than a 12-ounce soda can. Always check both numbers — especially if you carry insulated steel bottles, which are both wide and heavy.
FAQ
Will a motorcycle cup holder fit my specific bike?
How do I know if a cup holder can hold a 32-ounce bottle?
What does anti-theft mean on a cup holder?
Can I install a cup holder on a bike with handlebar risers?
How tight should the clamp be?
Do cup holders work on dirt bikes or off-road?
How do I clean a motorcycle cup holder?
Can I use a cup holder with a Bluetooth speaker?
Final Thoughts: The Verdict
For most riders, the best motorcycle cup holder is the FODSPORTS Upgraded Cup Holder because its aluminum alloy clamp, wide diameter range, and 32-ounce capacity cover the widest variety of bikes and bottle sizes at a fair price. If you carry a 40-ounce bottle every day, the Mathtoxyx Anti Theft is the one that will not flex on rough roads. And if you lean hard into corners and want your coffee to stay level, the RAM Mounts Level Cup XL brings self-leveling gimbal technology to big tumblers with a lifetime warranty backing it up.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Trending Car earns from qualifying purchases. This does not affect which products we feature.